✦ LIBER ✦

Determination of the fracture toughness of polycarbonate using an energy approach

✍ Scribed by Hiro Uete; Robert M. Caddell

Publisher: Elsevier Science
Year: 1983
Tongue: English
Weight: 311 KB
Volume: 25
Category: Article
ISSN: 0020-7403
DOI: 10.1016/0020-7403(83)90002-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fracture toughness determination of ABS

Fracture toughness determination of ABS polymers using the J-method

✍ Celina R. Bernal; Patricia M. Frontini; Ruben Herrera 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 779 KB

Experimental determination of the fractu

Experimental determination of the fracture toughness of CdTe

✍ B. Wermke; Dr. M. Petzold 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 English ⚖ 152 KB

On the determination of fracture toughne

On the determination of fracture toughness in polymers

✍ B.H. Kim; C.R. Joe; D.M. Otterson 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 453 KB

Determination of the dynamic fracture to

Determination of the dynamic fracture toughness using a new stress pulse loading method

✍ H. Stroppe; R. Clos; U. Schreppel 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 480 KB

Fracture toughness determination of brit

Fracture toughness determination of brittle materials using small to extremely small specimens

✍ G. Szendi-Horvath 📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 570 KB

Diametral compression of a grooved, disc shaped specimen is used to determine fracture toughness. This method's most important features are that extremely small specimens can be used and no knowledge of material properties is needed. It is suitable for many brittle materials, e.g. glass, cemented ca

Fracture toughness determination of bear

Fracture toughness determination of bearing steel using chevron-notch three point bend specimen

✍ Shang-Xian Wu 📂 Article 📅 1984 🏛 Elsevier Science 🌐 English ⚖ 950 KB

Stress intensity factor formulas and dimensionless compliance formula of chevron-notch three point bend specimen obtained by use of straight-through-crack assumption (STCA) and Bluhm's slice model have been presented. Two stress intensity factor coefficient formulas have been compared with the exper