𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Determination of the corrosion cracking resistance of cast ferritic-austenitic steel

✍ Scribed by Yu. I. Romatovskii; B. I. Voronenko; G. V. Churnalo; R. K. Melekhov

Publisher
Springer
Year
1993
Tongue
English
Weight
702 KB
Volume
28
Category
Article
ISSN
1573-885X

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

The influence of the ferritic and austen
The influence of the ferritic and austenitic phases and of silicon on the Corrosion resistance of alloyed cast steels
✍ Prof. Dr. L. Vehovar; B. Godec πŸ“‚ Article πŸ“… 1995 πŸ› John Wiley and Sons 🌐 German βš– 870 KB

## Abstract The paper deals with the influence of the Ξ±/gamma; phase ratio and silicon on the corrosion resistance of low carbon alloyed cast steels in strongly oxidizing media. Electrochemical investigations in 65% HNO~3~ + 5g Cr^6+^ ions/I showed that none of the four tested cast steels, with Ξ³~R

The austenitic manganese-chromium steels
The austenitic manganese-chromium steels resistant to stress corrosion cracking
✍ Prof. Ing. V. Číhal; Ing. E. PΕ™ibil πŸ“‚ Article πŸ“… 1992 πŸ› John Wiley and Sons 🌐 German βš– 468 KB πŸ‘ 1 views

## Abstract The basic type of MnCr steels (composition 0.05Mn19Cr13) was found to be highly resistant to chlorides. Additions of titanium, niobium and vanadium did not impair resistance to stress corrosion cracking, but addition of nickel in excess of 0.5% appreciably impaired the resistance. The c