✦ LIBER ✦

Determination of Specific Mechanical Energy Distribution on a Twin-Screw Extruder

✍ Scribed by S Godavarti; MV Karwe

Publisher: Elsevier Science
Year: 1997
Tongue: English
Weight: 383 KB
Volume: 67
Category: Article
ISSN: 0021-8634
DOI: 10.1006/jaer.1997.0172

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Impact of screw elements on continuous g

Impact of screw elements on continuous granulation with a twin-screw extruder

✍ Dejan Djuric; Peter Kleinebudde 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 311 KB

The influence of different screw element types on wet granulation process with a twin-screw extruder was investigated. Lactose granules were prepared with different screw configurations such as conveying, combing mixer and kneading elements. The use of kneading blocks led to an almost complete agglo

Material distribution in the partially f

Material distribution in the partially filled zone of a twin-screw extruder

✍ Robbert A. de Graaf; Dolf. J. Woldringh; Léon P. B. M. Janssen 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 151 KB 👁 2 views

Simulation of monomeric material transport in reactive extrusion revealed that two different situations can be distinguished in the partially filled zone of a twin-screw extruder. Material is transported from the bottom of the barrel to the top of the screw by drag or material remains on the bottom

Effect of screw rotation speed on the pr

Effect of screw rotation speed on the properties of polystyrene/organoclay nanocomposites prepared by a twin-screw extruder

✍ Shuichi Tanoue; Aniwat Hasook; Takumi Itoh; Masaharu Yanou; Yoshiyuki Iemoto; Ts 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 405 KB 👁 2 views

Reactive copolymerization of various mon

Reactive copolymerization of various monomers based on lactams and lactones in a twin-screw extruder

✍ In Kim; James L. White 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 220 KB 👁 2 views

Determination of twin-screw extruder ope

Determination of twin-screw extruder operational conditions for the preparation of thermoplastic vulcanizates on the basis of batch-mixer results

✍ F. Goharpey; R. Foudazi; H. Nazockdast; A. A. Katbab 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 405 KB 👁 1 views

Investigation on the uniformity of high-

Investigation on the uniformity of high-density polyethylene/wood fiber composites in a twin-screw extruder

✍ Jingjing Zhang; Chul B. Park; Ghaus M. Rizvi; Hanxiong Huang; Qingping Guo 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 826 KB

## Abstract Uniform dispersion of wood fiber in high‐density polyethylene can improve the mechanical properties and surface finish of the wood plastic composites. However, it is difficult to achieve uniform dispersion when the wood content is high, due to its low thermal stability, incompatibility