✦ LIBER ✦

Determination of fracture zone properties in mixed mode I and II

✍ Scribed by Manouchehr Hassanzadeh

Publisher: Elsevier Science
Year: 1990
Tongue: English
Weight: 843 KB
Volume: 35
Category: Article
ISSN: 0013-7944
DOI: 10.1016/0013-7944(90)90169-h

No coin nor oath required. For personal study only.

✦ Synopsis

A test equipment for the measurement of material properties within a damage zone subject to combined tension and shear deformations is described. Some results have been presented and discussed concerning the damage zone behaviour under such conditions.

📜 SIMILAR VOLUMES

Determination of fracture zone propertie

Determination of fracture zone properties in mixed mode I and II

✍ Monouchehr Hassanzadeh 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 78 KB

Abatraet-Notched beams of saturated concrete were tested, according to RILEM procedure, at temperatures ranging from 20 to -170°C. A model recently proposed by the authors, the Perturbed Ligament Model, was used to obtain size-independent Gr values. Results show that the perturbation lengths are tem

Temperature dependence and fracture crit

Temperature dependence and fracture criterion of mixed mode I/II fracture toughness of phenolic resin for friction material

✍ Wakako Araki; Hiroki Shintaku; Hiroyuki Ohashi; Yoshiki Horiuchi; Yoshio Arai 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 649 KB

Arrest of fast mode-i fracture in an ela

Arrest of fast mode-i fracture in an elastic-viscoplastic transition zone

✍ J. Aboudi; J.D. Achenbach 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 779 KB

Arrest of a rapidly propagating Mode-I crack has been investigated for a crack which initially propagates in an elastic solid, and then enters a region of viscoplastic material properties. The transition to the viscoplastic behavior has been modeled by a gradual process which starts at a certain tim

Fracture toughness of aged dental compos

Fracture toughness of aged dental composites in combined mode I and mode II loading

✍ Scherrer, Susanne S. ;Botsis, John ;Studer, Michel ;Pini, Monica ;Wiskott, H. W. 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 330 KB 👁 2 views

Crack tip yield zone estimates in mode I

Crack tip yield zone estimates in mode II interlaminar fracture of interleaved composites

✍ A. Aksoy; L.A. Carlsson 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 855 KB

An elastic stress analysis of the interleaved end notched flexure specimen was conducted by two-dimensional finite element modeling. The purpose of the study was to identify mechanisms that influence the enhancement of mode II interlaminar fracture toughness of interleaved composites. The study focu

Effects of loading rate and thickness on

Effects of loading rate and thickness on mixed-mode I/II fracture toughness of thermoset epoxy resin

✍ C. Kanchanomai; S. Rattananon 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 424 KB 👁 2 views

## Abstract The influences of loading rate and thickness on fracture behavior and mechanism of thermoset epoxy resin with polyamine hardener under mixed‐mode (mode I/II) loading have been studied at low thickness and low loading rate (LTLL), as well as high thickness and high loading rate (HTHL). U