✦ LIBER ✦

Determination of Fatigue Crack Initiation and Crack Propagation at Spot Welded Joints with High-Precision Thermometry

✍ Scribed by P. Xu

Book ID: 120801051
Publisher: Springer-Verlag
Year: 2004
Tongue: English
Weight: 352 KB
Volume: 48
Category: Article
ISSN: 0043-2288
DOI: 10.1007/BF03266446

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fatigue crack propagation rates and thre

Fatigue crack propagation rates and threshold stress intensity factors for welded joints of HT80 steel at several stress ratios

✍ A. Ohta; E. Sasaki; M. Nihei; M. Kosuge; M. Kanao; M. Inagaki 📂 Article 📅 1982 🏛 Elsevier Science 🌐 English ⚖ 417 KB

Numerical simulations of fatigue crack i

Numerical simulations of fatigue crack initiation and propagation based on re-tensile plastic zone generating load criterion for in-plane gusset welded joints

✍ Yukinobu Nagata; Koji Gotoh; Masahiro Toyosada 📂 Article 📅 2009 🏛 Springer 🌐 English ⚖ 955 KB

Fatigue tests and estimation of crack in

Fatigue tests and estimation of crack initiation and propagation lives in AISI 304L butt-welds with reinforcement intact

✍ P. Johan Singh; B. Guha; D.R.G. Achar 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 234 KB

High-cycle fatigue characteristics of qu

High-cycle fatigue characteristics of quasi-isotropic CFRP laminates over 108 cycles (Initiation and propagation of delamination considering interaction with transverse cracks)

✍ Atsushi Hosoi; Narumichi Sato; Yasuyuki Kusumoto; Keita Fujiwara; Hiroyuki Kawad 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 722 KB

High-cycle fatigue features of over 10 8 cycles, particularly the initiation and propagation of edge delamination considering the effects of transverse cracks, were investigated using quasi-isotropic carbon-fiberreinforced plastic (CFRP) laminates with a stacking sequence of [45/0/À45/90] s in this

Fatigue crack growth behaviour in welded

Fatigue crack growth behaviour in welded joints of high-strength steel at low temperature: Kitsunai, Y. and Yoshihisa, E. JSME Int. J. July 1991 Ser. I, 34, (3), 339–346

📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 173 KB

9732973 Fatigue strength of spot-welded

9732973 Fatigue strength of spot-welded joints of aluminium alloy sheets with solidification cracking nugget and its improvement : Jun Takagi, Nobuyuki Mori, Masao Fujimoto (Toyota Central R&D Labs, Inc.)

📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 138 KB

the scale model during right-angled side collision. The result agreed with that of the actual car very well. The safety condition of the occupant in the struck car at the side collision was investigated in this study.