๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Determination of critical strain for initiation of dynamic recrystallization

โœ Scribed by Soheil Solhjoo

Publisher
Elsevier Science
Year
2010
Weight
605 KB
Volume
31
Category
Article
ISSN
0261-3069

No coin nor oath required. For personal study only.

โœฆ Synopsis

Using the work hardening rate-strain curves, an effective mathematical model has been developed to predict the stress-strain curves of alloy steel during hot deformation up to the peak stress regardless of the level of the strain, weather smaller or larger than the critical strain. This model is expressed in terms of peak stress, peak strain and one temperature-sensitive parameter, S. In addition, one new model, which is a function of peak strain, was proposed to predict the critical strain for the initiation of dynamic recrystallization using the second derivative of work hardening rate with respect to stress. Besides the theoretical study, the analysis is used to determine the stress-strain curves and critical strain of 304 austenitic stainless steel. The predicted results were found to be in accord with the experimental data.

๐Ÿ“œ SIMILAR VOLUMES

Prediction of the critical conditions fo
Prediction of the critical conditions for initiation of dynamic recrystallization
โœ H. Mirzadeh; A. Najafizadeh ๐Ÿ“‚ Article ๐Ÿ“… 2010 ๐Ÿ› Elsevier Science โš– 813 KB

Both the critical stress and strain for initiation of dynamic recrystallization (DRX) were determined using: (1) the strain hardening rate versus stress curve, (2) the natural logarithm of strain hardening rate versus strain curve, and (3) the constitutive equations. In order to perform these analys

On the determination of critical ambient
On the determination of critical ambient temperatures and critical initial temperatures for thermal ignition
โœ B.F. Gray; G.C. Wake ๐Ÿ“‚ Article ๐Ÿ“… 1988 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 221 KB

A new set of dimensionless parameters and variables is defined with a view to simplifying and clarifying the theoretical determination of the initial ambient and the critical initial temperatures in spatially uniform self-heating systems. With these new variables the determination of the critical am