𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Determination of adhesion properties of wire-rope greases

✍ Scribed by V. I. Berezhinskii; N. F. Klubkova; V. S. Terebilo; L. F. Chesnok

Publisher
Springer US
Year
1977
Tongue
English
Weight
276 KB
Volume
13
Category
Article
ISSN
0009-3092

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Strength and other properties of wire ro
Strength and other properties of wire rope
✍ J.H. Griffith; J.G. Bragg πŸ“‚ Article πŸ“… 1919 πŸ› Elsevier Science 🌐 English βš– 189 KB

THE use of stop-watches in taking inverse-rate curves in thermal analysis is described, and it is shown that they may be substituted for the chronograph, which is often used without sacrificing accuracy or sensitivity. One operator is able to record the successive time intervals for the inverse-rate

Failure of crane wire rope
Failure of crane wire rope
✍ M. Torkar; B. ArzenΕ‘ek πŸ“‚ Article πŸ“… 2002 πŸ› Elsevier Science 🌐 English βš– 534 KB

A failure analysis of a broken multi strand wire rope from a crane was performed. The fracture of the steel wires in the wire rope showed characteristics of fatigue. On the wire surface were observed decarburised cracks which act as initiation sites for fatigue crack propagation during the applicati

Design of tuned mass dampers incorporati
Design of tuned mass dampers incorporating wire rope springs: Part I: Dynamic representation of wire rope springs
✍ Rafik R. Gerges; Barry J. Vickery πŸ“‚ Article πŸ“… 2005 πŸ› Elsevier Science 🌐 English βš– 759 KB

Two mathematical models for describing the effective stiffness and the equivalent viscous damping ratio of wire rope springs, as amplitude dependent, were developed. Twenty-four springs were tested in free vibration and the displacement decays were recorded. The free vibration time history was used