Determination of acetanilide herbicides in cereal crops using accelerated solvent extraction, solid-phase extraction and gas chromatography-electron capture detector

✍ Scribed by Yaping Zhang; Jun Yang; Ronghua Shi; Qingde Su; Li Yao; Panpan Li

• Publisher: John Wiley and Sons
• Year: 2011
• Tongue: English
• Weight: 283 KB
• Volume: 34
• Category: Article
• ISSN: 1615-9306
• DOI: 10.1002/jssc.201100058

✦ Synopsis

Abstract

A method was developed to determine eight acetanilide herbicides from cereal crops based on accelerated solvent extraction (ASE) and solid‐phase extraction (SPE) followed by gas chromatography‐electron capture detector (GC‐ECD) analysis. During the ASE process, the effect of four parameters (temperature, static time, static cycles and solvent) on the extraction efficiency was considered and compared with shake‐flask extraction method. After extraction with ASE, four SPE tubes (graphitic carbon black/primary secondary amine (GCB/PSA), GCB, Florisil and alumina‐N) were assayed for comparison to obtain the best clean‐up efficiency. The results show that GCB/PSA cartridge gave the best recoveries and cleanest chromatograms. The analytical process was validated by the analysis of spiked blank samples. Performance characteristics such as linearity, limit of detection (LOD), limit of quantitation (LOQ), precision and recovery were studied. At 0.05 mg/kg spiked level, recoveries and precision values for rice, wheat and maize were 82.3–115.8 and 1.1–13.6%, respectively. For all the herbicides, LOD and LOQ ranged from 0.8 to 1.7 μg/kg and from 2.4 to 5.3 μg/kg, respectively. The proposed analytical methodology was applied for the analysis of the targets in samples; only three herbicides, propyzamid, metolachlor and diflufenican, were detected in two samples.