𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Deterioration of concrete in cold sea waters

✍ Scribed by M. Moukwa


Publisher
Elsevier Science
Year
1990
Tongue
English
Weight
514 KB
Volume
20
Category
Article
ISSN
0008-8846

No coin nor oath required. For personal study only.

✦ Synopsis


The disruptive conditions of concrete exposed to cold sea water in the tidal zone are examined. They are the result of the combination of physical and chemical processes, one enhancing the other. Wetting and drying, freezing and thawing as thermal shocks generate microcracks and allow further saturation and deeper penetration of aggressive ions. These ions, in return, will react with the cement paste and disrupt further the concrete surface. Mineral additives, by densifying the matrix and improving the interface paste-aggregate, reduce the disruption of the concrete. Silica fume appears to be more efficient than blast furnace slag.


πŸ“œ SIMILAR VOLUMES


Phenomenological investigation of concre
✍ Shondeep L. Sarkar; Pierre-Claude AΓ―tcin πŸ“‚ Article πŸ“… 1991 πŸ› Elsevier Science 🌐 English βš– 946 KB

This paper discusses the findings from an investigation of a deteriorated reinforced concrete median barrier in Sherbrooke, Quebec, Canada. The barrier has been subjected to repeated freezing and thawing, deicer salts and exhaust fumes for a number of years. The study based on field samples, focus

Evaluation of deterioration in reinforce
✍ E. Proverbio πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 German βš– 646 KB

## Abstract Acoustic emission (AE) technique is gaining increasing interest for applications in civil engineering. AE indeed is a passive nonintrusive technique that can be applicable either in structural health monitoring (global evaluation) and in defect localization (local evaluation). The most

The development and stability of surface
✍ N.R. Buenfeld; J.B. Newman πŸ“‚ Article πŸ“… 1986 πŸ› Elsevier Science 🌐 English βš– 871 KB

Concrete exposed to sea-water may develop a surface skin causing a marked reduction in permeability.The skin typically consists of a layer of brucite (magnesium hydroxide) of around 30 ~m thickness, overlain by a thicker, but more slowly developing, layer of aragonite (calcium carbonate).The aragoni