Detection of cracks in structures using modal test data
β Scribed by T.Y. Kam; T.Y. Lee
- Publisher
- Elsevier Science
- Year
- 1992
- Tongue
- English
- Weight
- 609 KB
- Volume
- 42
- Category
- Article
- ISSN
- 0013-7944
No coin nor oath required. For personal study only.
β¦ Synopsis
A nondestructive evaluation procedure is presented for identifying a crack in a structure using modal test data. The structure is discretixed into a set of elements and the crack is assumed to be located within one of the elements. Measured vibration frequencies and mode shapes are used in an identification process to identify the cracked element based on a simple reduced stiffness model. Static deflection analyses of the structure with and without a crack are performed and a strain energy equilibrium equation is constructed for determining the size of the crack. The detection of a crack on a damaged beam is used to illustrate the applications of the proposed procedure. The present procedure is general and can be easily extended to complex structures with multiple cracks.
π SIMILAR VOLUMES
This paper describes a procedure for detecting structural damage based on a microgenetic algorithm using incomplete and noisy modal test data. As the number of sensors used to measure modal data is normally small when compared with the degrees of freedom of the finite element model of the structure,
This paper deals with the important question of structural safety after extreme loadings like an earthquake. The structure investigated here is the so-called 'Steelquake' benchmark structure, a two-storey building which was subjected by an artificial seismic loading causing cracks at three locations
Different algorithms have recently been developed for the diagnosis of many types of civil and mechanical structures using modal data, such as natural frequencies and mode shapes. Although many solutions have been proposed, some important questions seem to be absent in the technical literature. If c