Detection of cracks at rivet holes using guided waves
β Scribed by Paul Fromme; Mahir B. Sayir
- Publisher
- Elsevier Science
- Year
- 2002
- Tongue
- English
- Weight
- 290 KB
- Volume
- 40
- Category
- Article
- ISSN
- 0041-624X
No coin nor oath required. For personal study only.
β¦ Synopsis
Guided Lamb waves can be used for a fast inspection of large areas, e.g. the detection of cracks at rivet holes in the fuselage of airplanes. When the guided wave hits a discontinuity like a hole, a typical scattered displacement field is obtained. A change of the scattered field indicates the development of a crack. In the experiments, the first anti-symmetric mode A0 of Lamb waves in plates is excited selectively by means of a piezoelectric transducer. The used frequency range is below the cut-off frequencies of higher wave modes. The scattered field around undamaged and damaged holes is measured on a grid around the hole with a heterodyne laser interferometer. Two types of damage are introduced: a notch cut with a very fine saw blade, and a fatigue grown crack. A significant change in the scattered field due to the defect is seen. Good agreement of the experimental results with theoretical calculations is obtained. The wave propagation is studied using Mindlin's theory of plates. The scattered field is calculated analytically and using finite difference methods (FDMs).
π SIMILAR VOLUMES
g-Aminobutyric acid (GABA) is the major inhibitory neurotransmitter in human brain and has been implicated in several neuropsychiatric disorders. In vivo human brain GABA concentrations are near the detection limit for magnetic resonance spectroscopy (~1 mM), and because of overlap with more abundan