✦ LIBER ✦

Design study of the geometry of a punching/blanking tool

✍ Scribed by U.P. Singh; A.H. Streppel; H.J.J. Kals

Book ID: 108027295
Publisher: Elsevier Science
Year: 1992
Tongue: English
Weight: 636 KB
Volume: 33
Category: Article
ISSN: 0924-0136
DOI: 10.1016/0924-0136(92)90270-3

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Improved tool design for fine blanking t

Improved tool design for fine blanking through the application of numerical modeling techniques

✍ F. Klocke; K. Sweeney; H.-W. Raedt 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 493 KB

Consideration of buckling characteristic

Consideration of buckling characteristics for optimal design of stiffened punch in the blanking process of lead frame

✍ D.C. Ko; I.S. Lee; B.M. Kim 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 798 KB

The recent technical trend of semiconductor, chip size and high performance package technology, requires the IC lead frame to be of more multi-leads and fine pitch, and the corresponding punch thickness has been narrow. The members with high slenderness ratio such as a lead frame punch can be broken

A tool for punching the holes for the bu

A tool for punching the holes for the buckets of a belt hoist

✍ V. A. Kolontsov 📂 Article 📅 1993 🏛 Springer US 🌐 English ⚖ 62 KB

Effect of punch tip geometry and embossm

Effect of punch tip geometry and embossment on the punch tip adherence of a model ibuprofen formulation

✍ Matthew Roberts; James L. Ford; Graeme S. MacLeod; John T. Fell; George W. Smith 📂 Article 📅 2004 🏛 Pharmaceutical Press 🌐 English ⚖ 91 KB

The development of a design tool

✍ S.R. Lockley; M. Sun 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 789 KB

Simulation of the geometry of a multitoo

Simulation of the geometry of a multitooth mandrel for machining holes in pipe blanks

✍ A. N. Isaev; A. R. Lebedev; P. S. Arapov 📂 Article 📅 2010 🏛 Allerton Press, Inc. 🌐 English ⚖ 213 KB