The influence of design and operating parameters on minimum upstream bed height required for steady solid circulation across a compartmented gas-fluidized bed has been studied. The partition plate in the compartmented bed is fitted with two pairs of Vvalve and riser with orifices in them. Silica san
Design strategy for a gas/solid circulating fluidized bed reactor
- Publisher
- Elsevier Science
- Year
- 2001
- Weight
- 179 KB
- Volume
- 42
- Category
- Article
- ISSN
- 0140-6701
No coin nor oath required. For personal study only.
โฆ Synopsis
Process heating, power and incineration (energy applications in industry)
00100506
Bubble tower
๐ SIMILAR VOLUMES
Transient gas mixing tests in a gas--solid fluidized bed are analyzed with a dispersive plug flow model from the bubbling to the turbulent regime, and with the two-phase model of van Deemter. It is shown that dispersion fluctuations can also be used besides pressure fluctuations or capacitance probe
A special operation of gas-liquid-solid fluidization (the three-phase circulating fluidization) was investigated. The particle circulation flow rate in the circulating regime was measured. The gas holdup in this regime was obtained with a conductive probe. The relative solids holdup in the bubble