✦ LIBER ✦

Design, simulation, and fabrication of a MEMs switched superconducting microstrip hairpin filter

✍ Scribed by Jose Martinez; Yazan Hijazi; Mariya Brzhezinskaya; Albert Bogozi; Julien Noel; Yuriy A. Vlasov; Grover L. Larkins Jr.

Book ID: 108239707
Publisher: Elsevier Science
Year: 2007
Tongue: English
Weight: 822 KB
Volume: 466
Category: Article
ISSN: 0921-4534
DOI: 10.1016/j.physc.2007.06.006

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Accurate design of a compact superconduc

Accurate design of a compact superconducting microstrip filter

✍ Huili Peng; Xubo Guo; Shichao Jin; Yunlong Piao; Xiaoping Zhang; Bin Wei; Baoxin 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 136 KB

## Abstract This article presents a six‐pole high‐temperature superconducting (HTS) filter at 2.5 GHz with a compact size of 10 mm × 15 mm on MgO substrate. Twin‐spiral resonators with high simulation accuracy are used in the design procedure. EM simulations verify that the filter response is insen

Design and simulation of a thermally act

Design and simulation of a thermally actuated MEMS switch for microwave circuits

✍ Shumin Zhang; Wansheng Su; Mona Zaghloul 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 455 KB

The design, modeling, and optimization of a novel, thermally actuated CMOS-MEMS switch are presented in this article. This series capacitive MEMS switch solves the substrate loss and down-state capacitance degradation problems commonly plaguing MEMS switches. The switch uses finger structure for cap

Design of microstrip bandpass and lowpas

Design of microstrip bandpass and lowpass filters using coupling matrix method and a new hairpin defected ground structure

✍ Ahmed Boutejdar; Abbas Omar 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 416 KB

## Abstract In this work, we present a novel compact hairpin defected ground structure (DGS) bandpass and lowpass microstrip filter using two hairpin‐slots etched in the ground plane. A compact microstrip BPF using coupled DGS resonators is designed using coupling matrix method. The designed BPF sh

Fabrication and measurement of 5 GH

Fabrication and measurement of 5 GHz miniaturized 10-pole bandpass filter using superconducting microstrip quasi-spiral resonators

✍ S. Ono; Y. Harada; T. Kato; A. Saito; J.H. Lee; H. Kinouchi; T. Oba; M. Yoshizaw 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 321 KB

[IEEE Radio and Wireless Conference, 200

[IEEE Radio and Wireless Conference, 2003. RAWCON '03. - Boston, Massachusetts, USA (Aug. 10-13, 2003)] Radio and Wireless Conference, 2003. RAWCON '03. Proceedings - A design and fabrication of a new stacked bandpass filter using multilayer microstrip structure for wireless applications

✍ Djaiz, A.; Denidni, T.A. 📂 Article 📅 2003 🏛 IEEE 🌐 English ⚖ 294 KB

[IEEE IEEE Region 10 International Confe

[IEEE IEEE Region 10 International Conference on Electrical and Electronic Technology - Singapore (19-22 Aug. 2001)] Proceedings of IEEE Region 10 International Conference on Electrical and Electronic Technology. TENCON 2001 (Cat. No.01CH37239) - A design and fabrication of bandpass filter using miniaturized microstrip square SIR

✍ Hun Nam, ; Hyeonjin Lee, ; Yeongseog Lim, 📂 Article 📅 2001 🏛 IEEE 🌐 English ⚖ 477 KB