✦ LIBER ✦

Design of ferrocement under combined bending and axial loads

✍ Scribed by M.A. Mansur

Publisher: Elsevier Science
Year: 1987
Weight: 358 KB
Volume: 9
Category: Article
ISSN: 0262-5075
DOI: 10.1016/0262-5075(87)90006-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Collapse of cylindrical, elastic tubes u

Collapse of cylindrical, elastic tubes under combined bending, pressure and axial loads

✍ Ole Fabian 📂 Article 📅 1977 🏛 Elsevier Science 🌐 English ⚖ 912 KB

Part-through cracks in round bars under

Part-through cracks in round bars under cyclic combined axial and bending loading

✍ Andrea Carpinteri; Roberto Brighenti 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 638 KB

Ultimate load behaviour of welded thin-w

Ultimate load behaviour of welded thin-walled stub columns under combined loading of axial compression and bending

✍ Guo Yanlin 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 703 KB

Cylinder under combined axial and torsio

Cylinder under combined axial and torsion load

✍ B. Avitzur; J.Z. Pan 📂 Article 📅 1985 🏛 Elsevier Science ⚖ 562 KB

Cold-Formed Steel Design (Yu/Cold-Formed

Cold-Formed Steel Design (Yu/Cold-Formed Steel Design 4E) || Combined Axial Load and Bending

✍ Yu, Wei-Wen; LaBoube, Roger A. 📂 Article 📅 2010 🏛 John Wiley & Sons, Inc. ⚖ 538 KB

If twisting is prevented by properly designed bracing, the member will fail only flexurally by yielding or local buckling. When the bending moment is applied in any plane other than the plane of symmetry, the member will fail in the flexural-torsional buckling mode.

Three-dimensional finite element analysi

Three-dimensional finite element analysis of a tubular T-joint under combined axial and bending loading

✍ H.L.J. Pang; C.W. Lee 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 537 KB