## Abstract A compact printed monopole antenna for WLAN and WiMAX applications is proposed. By combining symmetrical Gβshaped strips and a couplingβfed plate, fed by a 50 Ξ© microstrip transmission line, wide impedance bandwidths covering WLAN/2.4/5.2 and WiMAX/5.75 are achieved. The omnidirectional
Design of Compact Printed Antenna for WiMAX & WLAN Applications
β Scribed by Barun Mazumdar; Ujjal Chakraborty; Aritra bhowmik; S.K. Chowdhury
- Book ID
- 118494153
- Publisher
- Elsevier
- Year
- 2012
- Weight
- 886 KB
- Volume
- 4
- Category
- Article
- ISSN
- 2212-0173
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
## Abstract A compact CPWβfed dualβwideband antenna formed by a rectangular ring monopole and a rectangular monopole is presented. The measured 10 dB bandwidths for return loss are achieved to be 46.3% (2.36β3.78 GHz) and 31.4% (5.1β7 GHz) in the lower and upper band, respectively, covering all the
## Abstract A compact printed monopole antenna applied to wireless local area network (WLAN) and worldwide interoperability for microwave access (WiMAX) applications is proposed. By combining a Cβshaped strip and two Lβshaped strips, fed by a 50βΞ© microstrip transmission line, multiple impedance ba
## Abstract In this paper, a novel compact printed monopole antenna with multiband operation for wireless local area networks (WLAN) is presented. A simple Cβshaped strip and a straight strip of this antenna provide two resonant paths to achieve 2.4β, 5.2β, and 5.8βGHz multiband operation. Good sim
## Abstract A compact tripleβband planar antenna applied to UMTS, WiFi and WiMAX applications is proposed. The proposed antenna provides three wide frequency bands, which are 1744β2759 MHz, 3271β4126 MHz and 4718β5908 MHz, realized in a commercial FR4 printedβ circuit board (PCB) with a permittivit
A triple-band dipole antenna with wideband balun integration is proposed in this article. This antenna consists of two dipoles, a wideband balun and feeding line. These three parts are integrated into a compact design, which has a small size of 30 Γ 25 Γ 0.8 mm 3 based on the substrate having a diel