## Abstract In this study, firstly, a novel U‐shaped defected ground structure(UDGS) cell is proposed to hold both wide band gap and excellent slow‐wave characteristic. The design, simulation, and fabrication of compact ultra wideband(UWB) low pass filters (LPFs) using two UDGSs and a compensated m
Design of a stopband-improved UWB filter using a pair of shunt and embedded open stubs
✍ Scribed by Min-Hang Weng; Hon Kuan; Wen-Lang Chen; Chang-Sin Ye; Yan-Kuin Su
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 467 KB
- Volume
- 51
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
In this letter, an ultrawideband (UWB) bandpass filter (BPF) with an improved stopband has been proposed. The proposed UWB BPF, having a lower passband of 3.5–5.2 GHz and a higher passband of 6.5–9.7 GHz, mainly comprises the parallel‐coupled lines and slot‐line resonator. A wide stopband of the proposed BPF from 10 to 20 GHz can be achieved by using a pair of shunt and embedded open stubs. The proposed UWB BPF is designed, fabricated, and measured. Good agreement with the electro‐magnetic simulation and measurement is demonstrated. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 2121–2124, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24556
📜 SIMILAR VOLUMES
## Abstract A microstrip line ultra‐wideband (UWB) bandpass filter with high performances using a pair of multiple‐mode resonators (MMRs) is proposed in this letter. A pair of MMRs and aperture on background are adopted in the filter to tighten the coupling strength of inter‐digital capacitor, and
## Abstract A novel compact wideband high‐rejection LPF using H‐shaped defected ground structure (DGS) elements is presented. The performance of the new H‐DGS was analyzed together with its effect on the filter performance. A wide rejection band and steep transition region was obtained. The filter