## Abstract A microstrip bandpass filter with a new type of capacitive‐coupled resonator is presented. The filter is designed to be smaller compared with the same type of parallel‐coupled bandpass filter. The filter is designed for a centre frequency of 2.5 GHz that lies in the S‐band frequency ran
Design of a microstrip filter using multiple capacitively loaded coupled lines
✍ Scribed by Tang, C.W.
- Book ID
- 115498308
- Publisher
- The Institution of Engineering and Technology
- Year
- 2007
- Tongue
- English
- Weight
- 172 KB
- Volume
- 1
- Category
- Article
- ISSN
- 1751-8725
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract A new eigenmode algorithm based on the method of lines and the generalized transmission line equations is applied on full‐wave analysis of (3‐D) MMIC components. The analytical calculation in the direction of propagation enables the analysis of structures of very short or long interconn
## Abstract Compact semilumped bandstop resonators are simply designed using parallel‐coupled microstrip line and lumped capacitors. The lumped capacitors loaded in between coupled lines increase the odd mode electrical length, and the frequency of transmission zero can be controlled by the lumped
## Abstract A bandpass filter using spiral parallel‐coupled‐lines is presented for size reduction. Based on the conventional parallel‐coupled‐line structures, different folded number and coupling structures are proposed for comparison. The band‐pass filter with three cells in series is constructed