Design, implementation, and dosimetry analysis of an S-band waveguide in vitro system for the exposure of cell culture samples to pulsed fields

✍ Scribed by José E. Varela; Juan E. Page; Jaime Esteban

• Publisher: John Wiley and Sons
• Year: 2010
• Tongue: English
• Weight: 367 KB
• Volume: 31
• Category: Article
• ISSN: 0197-8462
• DOI: 10.1002/bem.20579

✦ Synopsis

Abstract

The interaction between electromagnetic fields and biological media, particularly regarding very high power, short pulses as in radar signals, is not a fully understood phenomenon. In the past few years, many in vitro, cellular communications‐oriented exposure studies have been carried out. This article presents a high‐power waveguide exposure system capable of dealing with monochromatic, multicarrier or pulsed signals between 1.8 and 3.2 GHz (L‐ and S‐band) with a pulse duration as low as 90 ns, minimum pulse repetition of 100 Hz, and maximum instantaneous power of 100 W. The setup is currently being used with a 2.2 GHz carrier modulated by 5 µs pulses with a 100 Hz repetition period and approximately 30 W of instantaneous power. After a worst‐case temperature analysis, which does not account for conduction and convection thermal effects, the experiment's exposure is considered sub‐thermal. Evaluation of the results through the specific absorption rate distribution is not considered sufficient enough in these cases. An electromagnetic field distribution analysis is needed. For monochromatic signals, the representation of the modulus of the electric and magnetic field components is proposed as a suitable method of assessment. Bioelectromagnetics 31:479–487, 2010. © 2010 Wiley‐Liss, Inc.