𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Design, fabrication, and testing of a gradient-index binocular objective

✍ Scribed by Kindred, Douglas S. ;Moore, Duncan T.

Book ID
115335497
Publisher
The Optical Society
Year
1988
Tongue
English
Weight
370 KB
Volume
27
Category
Article
ISSN
1559-128X

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Design of a gradient-index photographic
Design of a gradient-index photographic objective
✍ Atkinson, Leland G. ;Houde-Walter, Susan N. ;Moore, Duncan T. ;Ryan, Danette P. πŸ“‚ Article πŸ“… 1982 πŸ› The Optical Society 🌐 English βš– 684 KB
Design, fabrication, and testing of an i
Design, fabrication, and testing of an insertable double-imaging-region gradient coil
✍ K. Craig Goodrich; J. Rock Hadley; Sung M. Moon; Blaine A. Chronik; Timothy J. S πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 289 KB

## Abstract We have constructed a small‐bore insertable gradient coil with two linear gradient imaging regions and interfaced it with an MRI scanner. We have also constructed an RF system capable of transmitting or receiving in both regions simultaneously. Designs for conductor placement for two‐re

Design, fabrication and testing of a sma
Design, fabrication and testing of a smart robotic foot
✍ Dean M. Aslam; Girish D. Dangi πŸ“‚ Article πŸ“… 2005 πŸ› Elsevier Science 🌐 English βš– 355 KB

A miniature smart robotic foot (SRF), equipped with an integrated vacuum pump, a suction cup, a pressure sensor and a micro-valve, was designed, fabricated and tested. A mock-up robot equipped with the SRF was used to study the load-carrying potential of the system. The SRF weighs 35 g and it can, w

Design, fabrication and testing of a hel
Design, fabrication and testing of a helium cooled module
✍ C.B Baxi; J Smith; D Youchison πŸ“‚ Article πŸ“… 1995 πŸ› Elsevier Science 🌐 English βš– 693 KB

Helium cooling has been shown to be very attractive from safety considerations as a coolant for ITER. However, there is a concern that use of helium will result in large manifolds and large pumping power. The purpose of this task was to design, fabricate and test a helium cooled divertor module for