✦ LIBER ✦

Design error simulation based on error modeling and sampling techniques

✍ Scribed by Youngmin Hur; Stephen A Szygenda

Book ID: 108453753
Publisher: Elsevier Science
Year: 1998
Tongue: English
Weight: 116 KB
Volume: 46
Category: Article
ISSN: 0378-4754
DOI: 10.1016/s0378-4754(97)00156-0

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Potential sampling errors based on biops

Potential sampling errors based on biopsy technique

📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 45 KB

NARX model selection based on simulation

NARX model selection based on simulation error minimisation and LASSO

✍ Bonin, M.; Seghezza, V.; Piroddi, L. 📂 Article 📅 2010 🏛 The Institution of Engineering and Technology 🌐 English ⚖ 597 KB

Soft error modeling and remediation tech

Soft error modeling and remediation techniques in ASIC designs

✍ Hossein Asadi; Mehdi B. Tahoori 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 829 KB

Repairing CAD model errors based on the

Repairing CAD model errors based on the design history

✍ Jeongsam Yang; Soonhung Han 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 861 KB

For users of CAD data, few things are as frustrating as receiving unusable, poor quality data. Users often waste time fixing or rebuilding such data from scratch on the basis of paper drawings. While previous studies use the boundary representation (B-Rep) of CAD models, we propose an approach to re

Servo controller design based on frequen

Servo controller design based on frequency-dependent error

✍ Katsuhisa Furuta; Osamu Suenaga 📂 Article 📅 1989 🏛 John Wiley and Sons 🌐 English ⚖ 289 KB

Simulation error minimization identifica

Simulation error minimization identification based on multi-stage prediction

✍ M. Farina; L. Piroddi 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 191 KB

## Abstract Classical prediction error minimization (PEM) methods are widely used for model identification, but they are also known to provide satisfactory results only in specific identification conditions, e.g. disturbance model matching. If these conditions are not met, the obtained model may ha