✦ LIBER ✦

Design and optimization of machining fixture layout using ANN and DOE

✍ Scribed by S. Selvakumar, K. P. Arulshri…

Book ID: 120742314
Publisher: Springer
Year: 2012
Tongue: English
Weight: 993 KB
Volume: 65
Category: Article
ISSN: 0268-3768
DOI: 10.1007/s00170-012-4281-2

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Machining fixture layout optimization us

Machining fixture layout optimization using FEM and evolutionary techniques

✍ G. Prabhaharan; K. P. Padmanaban; R. Krishnakumar 📂 Article 📅 2006 🏛 Springer 🌐 English ⚖ 280 KB

Design and optimization of machining fix

Design and optimization of machining fixture layout for end-milling operation

✍ Sundararaman, K. A.; Guharaja, S.; Padmanaban, K. P.; Sabareeswaran, M. 📂 Article 📅 2014 🏛 Springer 🌐 English ⚖ 853 KB

Machining fixture layout design using an

Machining fixture layout design using ant colony algorithm based continuous optimization method

✍ K. P. Padmanaban; K. P. Arulshri; G. Prabhakaran 📂 Article 📅 2009 🏛 Springer 🌐 English ⚖ 339 KB

Recent developments on machining fixture

Recent developments on machining fixture layout design, analysis, and optimization using finite element method and evolutionary techniques

✍ Vasundara, M.; Padmanaban, K. P. 📂 Article 📅 2013 🏛 Springer 🌐 English ⚖ 750 KB

Deformation control through fixture layo

Deformation control through fixture layout design and clamping force optimization

✍ Weifang Chen; Lijun Ni; Jianbin Xue 📂 Article 📅 2007 🏛 Springer 🌐 English ⚖ 223 KB

Machining fixture locating and clamping

Machining fixture locating and clamping position optimization using genetic algorithms

✍ Necmettin Kaya 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 386 KB

Deformation of the workpiece may cause dimensional problems in machining. Supports and locators are used in order to reduce the error caused by elastic deformation of the workpiece. The optimization of support, locator and clamp locations is a critical problem to minimize the geometric error in work