𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Design and optimization of LNA topologies with image rejection filters

✍ Scribed by Abbas Golmakani; Khalil Mafinejad; Abbas Kouzani

Publisher
John Wiley and Sons
Year
2010
Tongue
English
Weight
920 KB
Volume
20
Category
Article
ISSN
1096-4290

No coin nor oath required. For personal study only.

✦ Synopsis

An important problem in designing RFIC in CMOS technology is the parasitic elements of passive and active devices that complicate design calculations. This article presents three LNA topologies including cascode, folded cascade, and differential cascode and then introduces image rejection filters for low-side and high-side injection. Then, a new method for design and optimization of the circuits based on a Pareto-based multiobjective genetic algorithm is proposed. A set of optimum device values and dimensions that best match design specifications are obtained. The optimization method is layout aware, parasitic aware, and simulation based. Circuit simulations are carried out based on TSMC 0.18 lm CMOS technology by using Hspice. V

πŸ“œ SIMILAR VOLUMES

Design of compact, wide-band bandstop fi
Design of compact, wide-band bandstop filters with sharp-rejection characteristics
✍ Mrinal Kanti Mandal; Kandimalla Divyabramham; Subrata Sanyal πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 670 KB

## Abstract In this study, a novel transmission line configuration has been proposed to design a sharp‐rejecting, compact bandstop filter with wide rejection‐bandwidth. Signal interference technique is used to obtain transmission zeros, which provide the sharp rejection characteristic. Rejection ba

THE OPTIMAL AND STRAIGHTFORWARD DESIGN O
THE OPTIMAL AND STRAIGHTFORWARD DESIGN OF BANDPASS WAVE DIGITAL LATTICE FILTERS WITH ARBITRARY LOSS SPECIFICATIONS
✍ YASEEN, MOHAMED πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 467 KB πŸ‘ 2 views

An efficient, simple and reliable design method is introduced for bandpass wave digital lattice filters exhibiting arbitrary loss responses. The main feature of this method is that the approximation is straightforward. Thus it is carried out without the need to apply frequency transformation techniq

Design of compact microstrip filter with
Design of compact microstrip filter with large reject band using a new multisectioned T-shaped defected ground structure and multilayer technique
✍ M. Al Sharkawy; A. Boutejdar; D. Abd El Aziz; E. Galal πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 977 KB

## Abstract In this article, a new compact defected ground structure (DGS) low pass filter (LPF) with wide rejection band, low insertion loss in the stopband, and sharp transition from passband to stopband is proposed__.__ The prototype LPF is composed of three repetitive DGS elements with open stu