✦ LIBER ✦

Design and fabrication of compact 3-dB coupler in silicon-on-insulator

✍ Scribed by Lin ZhiLang; Cheng XinLi; Wang YongJin; Cao GongBai; Jia XiaoLin; Zhang Feng

Publisher: Elsevier Science
Year: 2004
Tongue: English
Weight: 309 KB
Volume: 240
Category: Article
ISSN: 0030-4018
DOI: 10.1016/j.optcom.2004.06.054

No coin nor oath required. For personal study only.

✦ Synopsis

A novel compact 3-dB coupler is proposed and fabricated in silicon-on-insulator. The new coupler provides large output waveguide spacing of 125.0 lm with short device length of 867.0 lm and large cross-section of 6.0 • 4.0 lm. The device length can be remained essentially unchanged even when the output spacing is further enlarged to realize the complex applications in photonic integrated circuits. The fabricated device exhibits excess loss of 6.3 dB and low imbalance of 0.26 dB.

📜 SIMILAR VOLUMES

Design of high-performance three-strip 3

Design of high-performance three-strip 3-DB directional coupler in multilayer technology with compensated parasitic reactances

✍ Slawomir Gruszczynski; Krzysztof Wincza; Krzysztof Sachse 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 266 KB

## Abstract Recently developed technique of discontinuity effect compensation in coupled stripline directional couplers, regarding the connection of coupled and terminating signal lines, has been for the first time applied to the design of multilayer three‐strip 3‐dB directional couplers. Results o

Properties, applications and fabrication

Properties, applications and fabrication of photonic crystals with ring-shaped holes in silicon-on-insulator

✍ A. Säynätjoki; M. Mulot; K. Vynck; D. Cassagne; J. Ahopelto; H. Lipsanen 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 610 KB

Design, fabrication and characterization

Design, fabrication and characterization of nano-filters in silicon microfluidic channels based on MEMS technology

✍ Xing Chen; Dafu Cui; Jian Chen 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 255 KB

A novel method in the design and fabrica

A novel method in the design and fabrication of dental splints based on 3D simulation and rapid prototyping technology

✍ Yanping Lin; Shilei Zhang; Xiaojun Chen; Chengtao Wang 📂 Article 📅 2006 🏛 Springer 🌐 English ⚖ 747 KB

‘Design, fabrication and demonstration o

‘Design, fabrication and demonstration of a prototype commuter aircraft boarding chair: a case study’ : Philips, B H and Wiklund, M E Boyer, D and Pollack, J (eds)Interface '91, Proc Seventh Symp on Human Factors and Industrial Design in Consumer Products, Dayton, Ohio. Human Factors Society, Santa Monica, California (1991) pp 266–271 (3 refs)

📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 143 KB

## ABSTRACTS that basic anthropometric safety designs offer one of the possible ways to prevent such injuries. Task analysis shows that issues such as prevention of entanglement of the infant due to accidental folding and the non-straining configuration for mother are interconnected with each othe