✦ LIBER ✦

Design and fabrication of a linear Paul trap for the study of space-charge-dominated beams

✍ Scribed by R. Takai; K. Ito; Y. Iwashita; H. Okamoto; S. Taniguchi; Y. Tomita

Publisher: Elsevier Science
Year: 2004
Tongue: English
Weight: 289 KB
Volume: 532
Category: Article
ISSN: 0168-9002
DOI: 10.1016/j.nima.2004.06.091

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Design and construction of a linear Paul

Design and construction of a linear Paul trap for the study of crystalline beams

✍ Niels Kjærgaard; Kristian Mølhave; Michael Drewsen 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 472 KB

Simulation studies on matching of space-

Simulation studies on matching of space-charge-dominated beams for the University of Maryland Electron Ring

✍ H Li; S Bernal; R.A Kishek; I Haber; Y Zou; P.G O’Shea; M Reiser 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 358 KB

Transverse beam envelope measurements an

Transverse beam envelope measurements and the limitations of the 3-screen emittance method for space-charge dominated beams

✍ J.G. Power; H. Wang; M.E. Conde; W. Gai; R. Konecny; W. Liu; Z. Yusof 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 333 KB

Study of ghost peaks resulting from spac

Study of ghost peaks resulting from space charge and non-linear fields in an ion trap mass spectrometer

✍ Kocher, F.; Favre, A.; Gonnet, F.; Tabet, J.-C. 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 406 KB 👁 2 views

Ion trap improvements require some geometrical modiÐcations which can alter signiÐcantly the relative linear and non-linear Ðeld contributions. In this work, where the ion trap was interfaced with an electrospray source, it was shown that under particular ion trapping conditions due to space charge,

The use of a phase space representation

The use of a phase space representation for the design of a beam transport system with doubly achromatic and dispersive modes of operation

✍ H.L. Hagedoorn; J.W. Broer; F. Schutte 📂 Article 📅 1970 🏛 Elsevier Science ⚖ 390 KB

(1) Development of manufacturing techniq

(1) Development of manufacturing techniques for lithium—aluminum/iron sulfide cells (2) Design, development and fabrication of a 40 kW h lithium/metal sulfide vehicle battery (3) Design and cost study for the mark II lithium alloy/ iron sulfide electric vehicle battery

📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 63 KB