✦ LIBER ✦

Design and Cooling Characteristic Results of Cryogenic System for 6.6 kV/200 A Inductive Fault Current Limiter

✍ Scribed by Kang, H.; Ahn, M.C.; Kim, H.J.; Chang, H.-M.; Ko, T.K.

Book ID: 121381673
Publisher: IEEE
Year: 2004
Tongue: English
Weight: 261 KB
Volume: 14
Category: Article
ISSN: 1051-8223
DOI: 10.1109/TASC.2004.830309

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Design and test results of 6.6 kV high-T

Design and test results of 6.6 kV high-Tc superconducting fault current limiter

✍ Yazawa, T.; Yoneda, E.; Matsuzaki, J.; Shimada, M.; Kuriyama, T.; Nomura, S.; Oh 📂 Article 📅 2001 🏛 IEEE 🌐 English ⚖ 502 KB

Design, fabrication techniques and test

Design, fabrication techniques and test results of 1.2 kV/80 A inductive fault current limiter by using conduction-cooled system

✍ Hyoungku Kang; Seungje Lee; Duck Kweon Bae; Min Cheol Ahn; Tae Kuk Ko 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 668 KB

An inductive superconducting fault current limiter protects power system by limiting the amplitude of fault current by the inductance of its dc reactor. Therefore, it is very important to design the dc reactor of high critical current prior to fabrication. At first, the optimal design parameters wer

Design guidelines of a flux-lock superco

Design guidelines of a flux-lock superconducting fault current limiter with ac magnetic field coil for a 6.6-kV distribution system

✍ Yu-Hung Guo; Yasunobu Yokomizu; Toshiro Matsumura 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 229 KB 👁 1 views

Design, fabrication and testing of super

Design, fabrication and testing of superconducting dc reactor for 1.2 kV/80 a inductive fault current limiter

✍ Hyoungku Kang, ; Min Cheol Ahn, ; Yong Ku Kim, ; Duck Kweon Bae, ; Yong Soo Yoon 📂 Article 📅 2003 🏛 IEEE 🌐 English ⚖ 427 KB

Improved design and system approach of a

Improved design and system approach of a three phase inductive hts fault current limiter for a 12 kVa synchronous generator

✍ Vajda, I.; Gyore, A.; Szalay, A.; Sokolovsky, V.; Gawalek, W. 📂 Article 📅 2003 🏛 IEEE 🌐 English ⚖ 297 KB

Development of a high-speed current limi

Development of a high-speed current limiter for a 6 kV distribution system and evaluation of its effectiveness

✍ H. Kurioka; T. Genji; M. Isozaki; H. Iwai; M. Yamada 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 220 KB 👁 1 views

We have developed a high-speed fault current limiting equipment for a 6 kV distribution system. The main components of this equipment are a high-speed vacuum switch (VCB) and gate turn-off thyristors (GTO) connected in parallel, and a current limiting impedance with low linear resistance in parallel