𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Design and construction of a wear simulator for knee joints

✍ Scribed by T.B. Kirk; G.W. Stachowiak


Publisher
Elsevier Science
Year
1992
Tongue
English
Weight
142 KB
Volume
25
Category
Article
ISSN
0021-9290

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Wear and toughness of crosslinked polyet
✍ Masao Akagi; Taiyo Asano; Ian C. Clarke; Norio Niiyama; Masayuki Kyomoto; Takash πŸ“‚ Article πŸ“… 2006 πŸ› Elsevier Science 🌐 English βš– 139 KB

## Abstract Severe loading and complex kinematics in total knee replacement make wear performance and toughness of the polyethylene in tibial inserts important. We investigated wear of crosslinked polyethylene using a knee simulator and measured toughness using small‐punch testing. GUR1050 rods wer

Polyethylene wear debris produced in a k
✍ Paul A. Williams; Cindy M. Brown; Riichro Tsukamoto; Ian C. Clarke πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 288 KB

## Abstract Polyethylene (PE) debris has been well studied in clinical retrievals and laboratory wear simulations of total hip replacements. However, little is known about PE debris from total knee replacements. In this study, we investigated the effects of crosslinking PE bearings and alternate co

Isolation and characterization of UHMWPE
✍ J.L. Tipper; A.L. Galvin; S. Williams; H.M.J. McEwen; M.H. Stone; E. Ingham; J. πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 221 KB

## Abstract There is currently considerable interest in the wear debris and osteolytic potential of different types of bearings used in total joint replacements. The biological activity of the wear debris is dependent on the size and volume of the particles produced. Wear volume also plays an impor