✦ LIBER ✦

Design and calibration of a cyclone for PM-1 ambient air sampling

✍ Scribed by R.A. Gussman; L.C. Kenny

Book ID: 117129312
Publisher: Elsevier Science
Year: 2000
Tongue: English
Weight: 108 KB
Volume: 31
Category: Article
ISSN: 0021-8502
DOI: 10.1016/s0021-8502(00)90201-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A Device for Sampling and Determination

A Device for Sampling and Determination of Total Particulate Mercury in Ambient Air

✍ Lu, Julia Y.; Schroeder, William H.; Berg, Torunn; Munthe, John; Schneeberger, D 📂 Article 📅 1998 🏛 American Chemical Society 🌐 English ⚖ 106 KB

Comparison of high volume sampling techn

Comparison of high volume sampling techniques for dioxins and furans in ambient air

✍ C. Tashiro; R.E. Clement; A. Szakolcai; W.H. Chan 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 243 KB

Assessment of the performance of a tunne

Assessment of the performance of a tunnel sampler and cascade impactor system for ambient air sampling

✍ Y. Vawda; I. Colbeck; Roy M. Harrison; K.W. Nicholson 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 647 KB

Testing of a sampling system and analyti

Testing of a sampling system and analytical method for determination of semivolatile organic compounds in ambient air

✍ M. Hippelein; H. Kaupp; G. Dörr; M.S. McLachlan 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 516 KB

Potential for simultaneous measurement o

Potential for simultaneous measurement of PM10, PM2.5 and PM1 for air quality monitoring purposes using a single TEOM

✍ G.P. Ayers 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 294 KB

Analysis of C1- and C2-halocarbons in am

Analysis of C1- and C2-halocarbons in ambient air from remote areas using stainless steel canister sampling, cold trap injection HRGC, and a static calibration technique

✍ Müller, S. ;Oehme, M. 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 English ⚖ 583 KB

## Abstract 5 ml air samples from 1.6 l stainless steel canisters were cryogenically preconcentrated before gas chromatographic separation on a thick‐film capillary using a home‐made cryotrap. Quantification in the 10–500 ppt range was carried out with an electron capture detector. Problems during