๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Design and analysis of an IEEE 802.16e-based OFDMA communication system

โœ Scribed by Krishna Balachandran; Doru Calin; Fang-Chen Cheng; Niranjan Joshi; Joseph H. Kang; Achilles Kogiantis; Kurt Rausch; Ashok Rudrapatna; James P. Seymour; Jonqyin Sun

Publisher
Institute of Electrical and Electronics Engineers
Year
2007
Tongue
English
Weight
289 KB
Volume
11
Category
Article
ISSN
1089-7089

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

System synchronization and channel estim
System synchronization and channel estimation analysis for IEEE 802.16e OFDMA downlink system
โœ Zhaoyang Zhang; Peng Cheng; Xiangwei Zhou; Peiliang Qiu ๐Ÿ“‚ Article ๐Ÿ“… 2009 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 363 KB

## Abstract System synchronization and channel estimation are two key problems of IEEE 802.16e Orthogonal Frequency Division Multiplex Access (OFDMA) downlink system. According to the standard, system synchronization is completed through the cell search procedure, which includes two steps: frame de

Design of an absorptive MMIC switch for
Design of an absorptive MMIC switch for satellite communication system
โœ In-Bok Yom; Keun-Kwan Ryu; Dong-Hwan Shin; Jong-Heung Park; Moon-Que Lee ๐Ÿ“‚ Article ๐Ÿ“… 2005 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 449 KB

A monolithic microwave integrated circuit (MMIC) switch chip is developed using the InGaAs/GaAs p-HEMT process for the switch matrix of a satellite communication system. An absorptive MMIC switch is designed for good reflection-coefficient performances of the input and output ports at both on-and of

DESIGN SENSITIVITY ANALYSIS AND OPTIMIZA
DESIGN SENSITIVITY ANALYSIS AND OPTIMIZATION OF AN ENGINE MOUNT SYSTEM USING AN FRF-BASED SUBSTRUCTURING METHOD
โœ D.-H. LEE; W.-S. HWANG; C.-M. KIM ๐Ÿ“‚ Article ๐Ÿ“… 2002 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 331 KB

The FRF-based substructuring method is one of the most powerful methods in analyzing the responses of complex built-up structures with high modal density. In this paper, a general procedure for the design sensitivity analysis of a vibro-acoustic system has been presented using the FRF-based substruc