Depression of sorption of volatile compounds into EVA film by electron beam irradiation
β Scribed by Toshirou Matsui; Seiya Mizumoto; Akitada Kotani; Hiroki Imakura; Mitsuya Shimoda; Yutaka Osajima
- Publisher
- John Wiley and Sons
- Year
- 1990
- Tongue
- English
- Weight
- 447 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0022-5142
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
Decrease in solubility of volatile compounds (octanβlβol, octanal, ethyl hexanoate, octane and dβlimonene) into a film liner was studied after electron beam irradiation up to 20 Mrad of ethylene vinyl acetate copolymer (EVA) film. The solubility coefficient decreased gradually during ageing despite no change immediately after the irradiation. In all films dosed with 5β20 Mrad the sorption was depressed about 40% in comparison with the unirradiated one after 4 months. The behaviour was consistent with that of the decay of the radicals in the films. The enthalpy change in sorption (ΞH) was β18.0 kJ mol^β1^ for 5 Mrad ethylene vinyl acetate copolymer film compared with β48.1 kJ mol^β1^ for the unirradiated one. In a homologous series, sorption was significantly depressed with increasing carbon chain length of the volatile compound. The specific sorption depression effect was observed for low polarity compounds such as hydrocarbons, aliphatic esters and dβlimonene. The diffusion coefficient of the sorbed compounds increased about 1.6 times after 3 months when irradiated to 20 Mrad.
π SIMILAR VOLUMES
The tackiness properties of radiation-vulcanized natural rubber latex (RVNRL) film surfaces coated by various monomers were investigated in order to define the suitable hydrogels which reduce the tackiness of the film. In this context, different types of monomers, namely, N-vinyl-2-pyrrolidone (NVP)
Polymer films consisting of nematic liquid crystal (LC) droplets and polymer networks were prepared by using a low-energy electron beam to irradiate a homogeneous mixture of nematic LC and bifunctional methacrylate monomer. Influences of such polymerization conditions as polymerization temperature,