✦ LIBER ✦

Densification behavior of iron powder during cold stepped compaction

✍ Scribed by C.S. Kang; S.C. Lee; K.T. Kim; O. Rozenberg

Publisher: Elsevier Science
Year: 2007
Tongue: English
Weight: 845 KB
Volume: 452-453
Category: Article
ISSN: 0921-5093
DOI: 10.1016/j.msea.2006.10.113

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Densification behavior of nanocrystallin

Densification behavior of nanocrystalline titania powder under cold compaction

✍ S.C. Lee; K.T. Kim 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 787 KB

Densification behavior of nanocrystalline titania powder was investigated under cold compaction. Experimental data were obtained from triaxial compression with various loading conditions. Lee and Kim proposed the Cap model by employing the parameters involved in the yield function of sintered metal

Densification behaviour in forming of si

Densification behaviour in forming of sintered iron–0.35% carbon powder metallurgy preform during cold upsetting

✍ S. Narayan; A. Rajeshkannan 📂 Article 📅 2011 🏛 Elsevier Science ⚖ 755 KB

Plastic deformation is an important process to improve and obtain final product for sintered powder materials to compete with solid metal formed parts. The densification behaviour and forming limits of sintered iron-0.35% carbon steel preforms with different aspect ratios, during cold upsetting with

Kinetics of the densification of silver

Kinetics of the densification of silver powder compacts during non-isothermal solid-state sintering. A phenomenological approach

✍ T.P. Bagchi; P.K. Sen 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 573 KB

Kinetics of densification of powder comp

Kinetics of densification of powder compacts during the initial stage of sintering with constant rates of heating. A thermal analysis approach. Part III. Copper powder compacts

✍ T.P. Bagchi; P.K. Sen 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 748 KB

Kinetics of densification of powder comp

Kinetics of densification of powder compacts during the initial stage of sintering with constant rates of heating. A thermal analysis approach. Part IV. Silver powder compacts

✍ T.P. Bagchi; P.K. Sen 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 449 KB

Some aspects on workability of aluminium

Some aspects on workability of aluminium–iron powder metallurgy composite during cold upsetting

✍ R. Narayanasamy; T. Ramesh; K.S. Pandey 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 460 KB

Workability is a measure of the extent of deformation that a powder metallurgy materials can withstand prior to fracture occurred in the forming or upsetting processes. Ductile fracture is the most common mode of failure in bulk forming process. The formability is a complicated phenomenon, dependent