๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Deep Drawing and Impact Extrusion of Magnesium Alloys at Room Temparature

โœ Scribed by H.-W. Wagener; J. Hosse-Hartmann; R. Friz

Publisher
John Wiley and Sons
Year
2003
Tongue
English
Weight
545 KB
Volume
5
Category
Article
ISSN
1438-1656

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Numerical and experimental investigation
Numerical and experimental investigations on the effect of the heating strategy and the punch speed on the warm deep drawing of magnesium alloy AZ31
โœ G. Palumbo; D. Sorgente; L. Tricarico; S.H. Zhang; W.T. Zheng ๐Ÿ“‚ Article ๐Ÿ“… 2007 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 827 KB

The present work has been focused on the warm deep drawing process by superimposing a thermal gradient between the blank centre in contact with the punch and the blank flange (which is going to be drawn). Using such a technique the limit drawing ratio of Mg alloys can be dramatically improved. As a

The activity of non-basal slip systems a
The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys
โœ J Koike; T Kobayashi; T Mukai; H Watanabe; M Suzuki; K Maruyama; K Higashi ๐Ÿ“‚ Article ๐Ÿ“… 2003 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 357 KB

Fine-grained alloys of Mg-3Al-1Zn-0.2Mn in wt.% (AZ31B) were obtained by an equal-channel angular extrusion technique and subsequent annealing at elevated temperatures. Tensile tests were performed at room temperature at a strain rate of 1x10 -3 s -1 . The alloys exhibited an apparent steady-state d