𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Debonding along the interface of composites

✍ Scribed by Y.C. Gao

Publisher
Elsevier Science
Year
1987
Tongue
English
Weight
180 KB
Volume
14
Category
Article
ISSN
0093-6413

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Cohesive zone model simulation of fatigu
Cohesive zone model simulation of fatigue debonding along interfaces
✍ F. Moroni; A. Pirondi πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier 🌐 English βš– 409 KB

In this work a cohesive zone model is developed to simulate fatigue crack propagation along bonded interfaces. The model is implemented by means of the USDFLD subroutine in the commercial software Abaqus. In particular, the crack growth increment is translated into a damage increment per cycle in th

Non-axisymmetric matrix cracking and int
Non-axisymmetric matrix cracking and interface debonding in unidirectional brittle matrix composites
✍ F.S. Ji; L.R. Dharani πŸ“‚ Article πŸ“… 1998 πŸ› Elsevier Science 🌐 English βš– 904 KB

A discrete fiber model is developed in this paper and applied to study the problem of nonaxisymmetric matrix cracking and interface debonding in unidirectional brittle-matrix fiber-reinforced composite materials subjected to an axial tensile load in the fiber direction. In this model, it is assumed

Modeling of adaptive composites includin
Modeling of adaptive composites including debonding
✍ Charles E. Seeley; Aditi Chattopadhyay πŸ“‚ Article πŸ“… 1999 πŸ› Elsevier Science 🌐 English βš– 555 KB

Debonding of piezoelectric actuators for use in composite structures can result in signi\_cant changes to the static and dynamic response[ This important issue is studied in the current work[ The re\_ned higher order theory for composite laminates with embedded:surface bonded piezoelectric sensors a

Debonding failure along a softening FRP-
Debonding failure along a softening FRP-to-concrete interface between two adjacent cracks in concrete members
✍ J.F. Chen; H. Yuan; J.G. Teng πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 881 KB

A concrete beam can be strengthened by bonding a fibre reinforced polymer (FRP) plate to the tension face, and a common failure mode for such beams involves the debonding of the FRP plate that initiates at a major flexural crack, which is widely referred to as intermediate crack (IC) debonding. To u