Cycling behaviour of the polypyrrole—polyethylene oxide composite electrode
✍ Scribed by Petr Novák; Olle Inganäs; Robert Bjorklund
- Publisher
- Elsevier Science
- Year
- 1987
- Tongue
- English
- Weight
- 478 KB
- Volume
- 21
- Category
- Article
- ISSN
- 0378-7753
No coin nor oath required. For personal study only.
✦ Synopsis
An all-solid-state battery utilizing a thin, composite polypyrrolepolyethylene oxide positive electrode, solid polymeric electrolyte, and a lithium negative electrode was constructed and its cycling behaviour evaluated. Hundreds of cycles were reached before the coulombic capacity decreased to 60% of its original value. The gravimetric energy density of the composite electrode was estimated to be 55 W h kg-'. The disadvantage of the battery is poor charge retention, and high-rate performance is limited by the diffusion of anions in the polypyrrole particles.
📜 SIMILAR VOLUMES
Commercial purity aluminium reinforced with SiC particles has been used to model the behaviour of metal matrix composites (MMCs) during thermal cycling. Above a critical temperature amplitude of about 150 °C an acceleration in creep under the load occurs. This is accompanied by a reduction in the cr
Solid carbon composite electrodes (CCEs) prepared by copper(I) oxide (Cu,O) dispersed in polyethylene and graphite powder have been investigated for use as working electrode in amperometric flow-through detection in alkaline solutions. The effects of matrix composition, electrocatalyst loading, shor
The ion transport accompanying the redox reactions of polypyrrole at a polypyrrole-Nafion composite electrode was investigated with systems containing specifically selected electrolytes. From the cyclic voltammetric and impedance data obtained, transport of cations was found to be responsible for th
## Abstract New composite systems were prepared by deposition of conducting polymer (polypyrrole) and polyacrylic acid onto polyethylene porous support. Polypyrrole layers were formed by oxidative polymerization from the gas phase of the monomer, and the layers of polyacrylic acid were deposited fr