✦ LIBER ✦

Cyclic-Fatigue Crack Initiation and Propagation in Smooth Alumina Specimens

✍ Scribed by Hidehiro Kishimoto; Akira Ueno; Atsushi Matsunaga; Takuya Kondo

Book ID: 110090002
Publisher: John Wiley and Sons
Year: 2005
Tongue: English
Weight: 770 KB
Volume: 81
Category: Article
ISSN: 0002-7820
DOI: 10.1111/j.1151-2916.1998.tb02295.x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fatigue crack initiation and propagation

Fatigue crack initiation and propagation under cyclic contact loading

✍ G. Fajdiga; M. Sraml 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 958 KB

A computational model for contact fatigue damage analysis of gear teeth flanks is presented in this paper. The model considers the conditions required for the surface fatigue crack initiation and then allows for proper simulation of the fatigue crack propagation that leads to the appearance of small

A combined fatigue crack initiation and

A combined fatigue crack initiation and propagation specimen—its initial development

✍ J.W. Provan; F. Bonsang; K. Rezai; A. Powell 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 994 KB

Cyclic Fatigue Crack Propagation in Alum

Cyclic Fatigue Crack Propagation in Alumina under Direct Tension—Compression Loading

✍ Michael J. Reece; Frank Guiu; Mohammad F. R. Sammur 📂 Article 📅 1989 🏛 John Wiley and Sons 🌐 English ⚖ 594 KB

Considerations of crack initiation and c

Considerations of crack initiation and crack propagation in low-cycle fatigue

✍ P.S. Maiya 📂 Article 📅 1975 🏛 Elsevier Science ⚖ 235 KB

Cyclic fatigue of long and short cracks

Cyclic fatigue of long and short cracks in alumina

✍ J HEALY; A. J BUSHBY; Y.-W MAI; A. K MUKHOPADHYAY 📂 Article 📅 1997 🏛 Springer 🌐 English ⚖ 940 KB

Surface-crack propagation in plane-bendi

Surface-crack propagation in plane-bending fatigue of smooth specimen of low-carbon steel

✍ K. Tanaka; T. Hoshide; O. Maekawa 📂 Article 📅 1982 🏛 Elsevier Science 🌐 English ⚖ 713 KB

Almtract--Long-life fatigue tests of smooth specimens of low-carbon steel were conducted under cyclic plane bending with zero mean stress. The propagation rate of small surface cracks nucleated at the corner of the specimen was measured and analysed from the viewpoints of linear and elastic-plastic