๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Cryogenic problems of forced cooled superconducting systems

โœ Scribed by V.E. Keilin; E.Yu. Klimenko


Publisher
Elsevier Science
Year
1972
Tongue
English
Weight
378 KB
Volume
12
Category
Article
ISSN
0011-2275

No coin nor oath required. For personal study only.

โœฆ Synopsis


Methods of producing cold compressed helium, various ways of refrigerant distribution and ways of reducing cool-down time being applied to forced cooled superconducting systems (FCSS) are discussed. The conditions obtained are for preventing normal zone progapation from current leads inwards into the winding. The analysis shows that main cryogenic problems of FCSS can be relatively simply solved.


๐Ÿ“œ SIMILAR VOLUMES


Refrigerator-recirculator systems for la
โœ A. Bejan ๐Ÿ“‚ Article ๐Ÿ“… 1977 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 694 KB

Forced-cooled superconductors are viewed as a promising alternative in the development of high field superconducting magnets for future fusion devices. The high current density cabled superconductor is protected against thermal instabilities by forcing (single phase) supercritical helium through the

Cryogenic characteristics of a large thi
โœ T. Haruyama; O. Araoka; Y. Doi; K. Kasami; N. Kimura; T. Kondo; Y. Kondo; Y. Mak ๐Ÿ“‚ Article ๐Ÿ“… 1994 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 345 KB

A prototype thin superconducting solenoidal magnet for the SDC detector (Solenoidal Detector Collaboration for the former SSC project) was developed. The magnet was cooled down and excited up to 12,000A in the performance test at KEK. The magnet is 3.8 m in diameter, 2 m in length with a total cold

A cold box for the forced cooling system
โœ V.I Bondarenko; L.B Dinaburg; V.F Fokeev; V.V Kalinin; P.N Selyankin ๐Ÿ“‚ Article ๐Ÿ“… 1981 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 143 KB

A cold box, which does not have temperature expanders, designed for a forced cooling system is described. The cold box can be used to main rain superconducting magnets at 4.5 -+ 5 K for a Iong period of time. Tests on the cold box have shown that the mass flow rate of forced cooling flow is 6 + -10