Polytetrafluoroethylene (PTFE)-based composites, filled with CeO 2 , CeF 3 , and La 2 O 3 in volume contents of 5, 10, 15, 20, and 30%, were prepared. Then, the friction and wear behavior of these PTFE composites sliding against GCr15 bearing steel under both dry and liquid paraffin-lubricated condi
Cryogenic Friction Behavior of PTFE based Solid Lubricant Composites
โ Scribed by N. L. McCook; D. L. Burris; P. L. Dickrell; W. G. Sawyer
- Publisher
- Springer US
- Year
- 2005
- Tongue
- English
- Weight
- 330 KB
- Volume
- 20
- Category
- Article
- ISSN
- 1023-8883
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
The friction and wear behaviors of polytetrafluoroethylene (PTFE)-based composites filled with rare earth compounds CeO 2 , CeF 3 , and La 2 O 3 in volume content from 5 to 30% sliding against GCr15 bearing steel under dry friction conditions were evaluated by using an MHK-500 ring-block wear tester
Four kinds of polytetrafluoroethylene (PTFE)-based composites, such as pure PTFE, PTFE / 30 (vol.)% carbon fiber, PTFE / 30(vol.) % glass fiber, and PTFE / 30(vol.)% K 2 Ti 6 O 13 whisker composite, were prepared. The friction and wear properties of these fiber-and whisker-reinforced PTFE composites
Four kinds of polytetrafluoroethylene(PTFE)-based composites, such as pure PTFE, PTFE/30%(v)PbO, PTFE/30%(v)Pb 3 O 4 , and PTFE/30%(v)Cu 2 O composite, were prepared. The friction and wear properties of these metal oxides filled PTFE composites sliding against GCr15 bearing steel in both dry and lub