✦ LIBER ✦

Crosslinking of polypropylene–polyethylene blends by peroxide and the effect of pentaerythritol tetrallyl ether

✍ Scribed by Eberhard Borsig; Agnesa Fiedlerová; Lyda Rychlá; Milan Lazár; Manfred Rätzsch; Gottfried Haudel

Publisher: John Wiley and Sons
Year: 1989
Tongue: English
Weight: 618 KB
Volume: 37
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.1989.070370213

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of dynamic shear on the microcell

Effect of dynamic shear on the microcellular foaming of polypropylene/high-density polyethylene blends

✍ Ping Zhang; Xiao-Jun Wang; Yong Yang; Nanqiao Zhou 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 959 KB

Effect of the high-density polyethylene

Effect of the high-density polyethylene melt index on the microcellular foaming of high-density polyethylene/polypropylene blends

✍ P. Rachtanapun; S. E. M. Selke; L. M. Matuana 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 175 KB 👁 2 views

Dynamically vulcanized polypropylene/sty

Dynamically vulcanized polypropylene/styrene–butadiene rubber blends: The effect of a peroxide/bismaleimide curing system and composition

✍ Paulo R. S. Leite; Bluma G. Soares; Alex S. Sirqueira 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 907 KB

## Abstract Polypropylene (PP)/styrene–butadiene rubber blends were studied with special attention given to the effects of the blend ratio and dynamic vulcanization. Dicumyl peroxide (DCP) was used as the curing agent in combination with __N,N__′‐__m__‐phenylene bismaleimide (BMI) as the coagent fo

Semicrystalline blends of polyethylene a

Semicrystalline blends of polyethylene and isotactic polypropylene: Improving mechanical performance by enhancing the interfacial structure

✍ Kimberly A. Chaffin; Frank S. Bates; Patrick Brant; Gary M. Brown 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 421 KB 👁 2 views

The low-temperature mechanical behavior of semicrystalline polymer blends is investigated. Isotactic polypropylene (iPP) is blended with both Zeigler-Natta polyethylene (PE) and metallocene PE. Transmission electron microscopy (TEM) on failed tensile bars reveals that the predominate failure mode in

Binary and ternary blends of polyethylen

Binary and ternary blends of polyethylene, polypropylene, and polyamide 6,6: The effect of compatibilization on the morphology and rheology

✍ R. Krache; D. Benachour; P. Pötschke 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 551 KB

Flammability of blends of low-density po

Flammability of blends of low-density polyethylene and ethylene vinyl acetate crosslinked by both dicumyl peroxide and ionizing radiation for wire and cable applications

✍ T. M. Shukri; J. Mosnáček; A. A. Basfar; M. A. Bahattab; P. Noireaux; A. Courdre 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 124 KB 👁 2 views

## Abstract Formulations of chemically crosslinked and radiation‐crosslinked low‐density polyethylene (LDPE) containing an intumescent flame retardant such as ammonium polyphosphate were prepared. The influence of blending LDPE with poly(ethylene vinyl acetate) (EVA) as well as the effects of a coa