Crosslinking of chlorine-containing polymers by dicyclopentadiene dicarboxylic salts

✍ Scribed by Eli Ruckenstein; Xiaonong Chen

• Publisher: John Wiley and Sons
• Year: 2000
• Tongue: English
• Weight: 151 KB
• Volume: 38
• Category: Article
• ISSN: 0887-624X
• DOI: 10.1002/(sici)1099-0518(20000301)38:5<818::aid-pola6>3.0.co;2-d

✦ Synopsis

Alkali-and alkali-earth-metal salts of dicyclopentadiene dicarboxylic acid (DCPDCA) were prepared and employed as crosslinkers for chlorine-containing polymers such as polychloromethylstyrene (PCMS), chlorinated polypropylene (CPP), polyepichlorohydrin (PECH), and poly(vinyl chloride) (PVC). Thermally reversible covalent crosslinks (i.e., ODCPDO bridges) between polymer chains were generated through esterification between the chlorine-carbon bonds of the polymer and the carboxylic salt groups of the crosslinker. The crosslinking reactivity decreased in the following sequence: KO Ͼ NaO Ͼ LiDCPDCA Ͼ alkali-earth-metal salts of DCPDCA. In addition, PCMS and CPP had higher gelation rates than PECH and PVC. Good flowability at about 195 °C and solubility in maleimide-containing dichlorobenzene on heating indicated that the crosslinked PCMS and CPP exhibited thermally reversible crosslinking because of dimer/monomer (cyclopentadiene) conversion of ODCPDO moieties via reversible Diels-Alder cycloaddition. Samples of PECH and PVC crosslinked by the alkali salts of DCPDCA were insoluble even when heated in maleimide-containing dichlorobenzene. However, these crosslinked polymers could be dissolved partially after the same treatment when the crosslinker was an alkali-earth-metal salt of DCPDCA. Thermal degradation such as dehydrochlorination of the PECH and PVC might have been responsible for uncontrolled crosslinking because these two polymers are known to be thermally unstable. The unreacted COOK, COONa, or COOLi of the crosslinkers might have initiated base-induced dehydrochlorination when PECH and PVC were heated at high temperatures.