𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Crosslinked acrylic pressure-sensitive adhesives. II. Effect of humidity on the crosslinking reaction

✍ Scribed by Junko Asahara; Ayako Sano; Naruhito Hori; Akio Takemura; Hirokuni Ono


Publisher
John Wiley and Sons
Year
2003
Tongue
English
Weight
117 KB
Volume
89
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

The effect of humidity during storage on the crosslinking reactions of isocyanate groups was investigated with attenuated total reflectance Fourier transform infrared spectroscopy with pressure‐sensitive adhesives composed of poly[ethyl acrylate‐co‐(2‐ethylhexyl acrylate)‐co‐(2‐hydroxyethyl methacrylate)] as a base resin and polyisocyanate as a crosslinker. A peak‐resolving analysis of the amide II region revealed four bands. According to an analysis of the Fourier transform infrared spectra of the model compounds, these four bands were assigned to free urethane linkages, hydrogen‐bonded urethane linkages, free urea linkages, and hydrogen‐bonded urea linkages. As expected, storage under humid conditions led to the formation of free and hydrogen‐bonded urea linkages corresponding to the promotion of isocyanate consumption. Peak resolution of the amide II region was found to be a reasonable way of monitoring urethane and urea linkages during crosslinking reactions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3039–3045, 2003


📜 SIMILAR VOLUMES


UV curable pressure-sensitive adhesives
✍ Katsuhiko Horigome; Kazuyoshi Ebe; Shin-ichi Kuroda 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 90 KB 👁 2 views

## Abstract In an attempt to control the adhesive properties of acrylic copolymer‐based pressure‐sensitive adhesives, a series of multifunctional acrylate monomers were added and UV cured. The adhesive compound with a difunctional monomer had increased peel strength after UV curing. On the other ha

Effect of network morphology on adhesive
✍ Singa Tobing; Andrew Klein; L.H. Sperling; Bob Petrasko 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 226 KB 👁 2 views

## Abstract High‐gel containing latices and gel‐free latex were blended at various weight ratios. The high‐gel containing latices was made of poly(2‐ethyl hexylacrylate‐__stat__‐acrylic acid) and the gel‐free latex was made of poly(2‐ethyl hexylacrylate‐__stat__‐acrylic acid‐__stat__‐isobutoxymethy