𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Critical current densities in YBaCuO coatings prepared using internal and external feed plasma spray systems

✍ Scribed by D.Maheswar Reddy; G. Swaminathan; S. Rajendra; S.Rajendra Kumar; K. Venugopal; S. Ravichandran; M.V.T. Dhananjeyan; S.C. Mohan

Publisher
Elsevier Science
Year
1991
Tongue
English
Weight
479 KB
Volume
206
Category
Article
ISSN
0040-6090

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Strength and critical current density of
Strength and critical current density of Bi(Pb)SrCaCuO and YBaCuO in silver-sheathed superconducting tapes
✍ S. Ochiai; K. Hayashi; K. Osamura 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 793 KB

The critical current density at 77 K at 0 T and the tensile strength at room temperature of high Tc Bi(Pb)-Sr-Ca-Cu-O and Y-Ba-Cu-O oxides in silver-sheathed tapes prepared by the powder-in-tube method were investigated. The main results can be summarized as follows. (1) The critical current density

Preparation and critical current density
Preparation and critical current density of melt-processed YBaCuO thick films and AgPd-sheathed tapes
✍ K Fischer; G Leitner; G Fuchs; M Schubert; B Schlobach; A Gladun; C Rodig 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 768 KB

Thermal analysis by differential scanning calorimetry (DSC) has shown that melting of YBa2Cu30 x is completed at 1000-1010°C in a nitrogen atmosphere. The N 2 can be exchanged by 02 without solidification of the melt and the solidification starts in 02 below 1000°C in the supercooled melt• Applying