Creep Resistant Polymer Nanocomposites Reinforced with Multiwalled Carbon Nanotubes

✍ Scribed by Jinglei Yang; Zhong Zhang; Klaus Friedrich; Alois K. Schlarb

• Publisher: John Wiley and Sons
• Year: 2007
• Tongue: English
• Weight: 245 KB
• Volume: 28
• Category: Article
• ISSN: 1022-1336
• DOI: 10.1002/marc.200600866

✦ Synopsis

Abstract

Poly(propylene) (PP) nanocomposites filled with shorter‐ and longer‐aspect‐ratio multiwalled carbon nanotubes (MWNTs) were compounded using a twin‐screw extruder and an injection moulding machine. It is shown that with only 1 vol.‐% of MWNTs, creep resistance of PP can be significantly improved with reduced creep deformation and creep rate at a long‐term loading period. Additionally, the creep lifetime of the nanocomposites has been considerably extended by 1 000% compared to that of a neat PP. Three possible mechanisms of load transfer were considered that could contribute to the observed enhancement of creep resistance, which are: (1) fairly good interfacial strength between MWNTs and polymer matrix, (2) increasing immobility of amorphous regions due to nanotubes acting as restriction sites, and (3) high aspect ratio of MWNTs. DSC results showing crystallinity changes in the specimens before and after creep deformation present evidence to confirm these mechanisms. Our results should lead to improved grades of creep resistant polymer nanocomposites for engineering applications.

magnified image