𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Creep of CMSX-4 single crystals of different orientations in tension and compression

✍ Scribed by P. Lukáš; J. Čadek; V. Šustek; L. Kunz

Publisher
Elsevier Science
Year
1996
Tongue
English
Weight
957 KB
Volume
208
Category
Article
ISSN
0921-5093

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A model for the creep deformation behavi
A model for the creep deformation behaviour of single-crystal superalloy CMSX-4
✍ A. Ma; D. Dye; R.C. Reed 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 385 KB

Constitutive equations are constructed for single-crystal nickel-based superalloys. Account is taken of dislocation glide in the channels of the matrix phase (referred to as c) of the face-centred cubic (fcc) type, dislocation climb at the interfaces with the reinforcing L1 2 precipitates (referred

X-ray topography and crystal orientation
X-ray topography and crystal orientation study of a nickel-based CMSX-4 superalloy single crystal
✍ A. Onyszko; W. Bogdanowicz; K. Kubiak; J. Sieniawski 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 327 KB

## Abstract A study of the crystal orientation and structural perfection of single crystal blades obtained by Bridgeman method from CMSX‐4 nickel superalloy at various withdrawal rates between 1 and 5 mm/min was carried out using the Laue diffraction method and X‐ray diffraction topography methods

Shear Creep Deformation of the Super All
Shear Creep Deformation of the Super Alloy Single Crystal CMSX-4 at High Temperatures and Low Stresses
✍ M. Kamaraj; K. Serin; M. Kolbe; K. Neuking; G. Eggeler 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 592 KB

## Abstract In the present paper we investigate the shear creep behavior of the single crystal super alloy CMSX‐4 at temperatures between 950 and 1100 °C and shear stresses ranging from 80 to 155 MPa. A double shear creep test technique is used to study the shear creep behavior of four specific mac