✦ LIBER ✦

Creep in a Cu-14at.%Al solid solution alloy at intermediate temperatures and low stresses

✍ Scribed by L. Kloc; J. Fiala; J. Čadek

Book ID: 108025405
Publisher: Elsevier Science
Year: 1990
Tongue: English
Weight: 648 KB
Volume: 130
Category: Article
ISSN: 0921-5093
DOI: 10.1016/0921-5093(90)90057-a

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

On the low stress creep in Cu-14Al alloy

On the low stress creep in Cu-14Al alloy and α-zirconium at intermediate temperatures

✍ J. Fiala; L. Kloc; J. Čadek 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 581 KB

Creep behaviour of a Ni15Cr solid solut

Creep behaviour of a Ni15Cr solid solution alloy at low stresses and intermediate temperatures

✍ L. Kloc; J. Fiala; J. Čadek 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 557 KB

Creep in metals at intermediate temperat

Creep in metals at intermediate temperatures and low stresses: a review

✍ J. Fiala; L. Kloc; J. Čadek 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 863 KB

On the applicability of a phenomenologic

On the applicability of a phenomenological relationship to creep at low stresses and intermediate temperatures

✍ T. Sritharan; H. Jones 📂 Article 📅 1983 🏛 Elsevier Science ⚖ 324 KB

The influence of stacking fault energy o

The influence of stacking fault energy on the creep behaviour of Ni-Cu-solid-solution alloys at intermediate temperatures

✍ M. S. Soliman 📂 Article 📅 1995 🏛 Springer 🌐 English ⚖ 434 KB

The creep characteristics of Ni-Cu alloys at intermediate temperatures (T 7) and the activation energy for creep (which is less than the activation energy for lattice diffusion), suggest that the creep mechanism is dislocation climb controlled by pipe diffusion. The present analysis shows that the c

The Breakdown in Creep by Viscous Glide

The Breakdown in Creep by Viscous Glide in AlMg Solid Solution Alloys at High Stress Levels

✍ Northwood, D. O. ;Moerner, L. ;Smith, I. O. 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 English ⚖ 446 KB