Creep behavior of amorphous ethylene–styrene interpolymers in the glass transition region

✍ Scribed by H. Y. Chen; E. V. Stepanov; S. P. Chum; A. Hiltner; E. Baer

• Publisher: John Wiley and Sons
• Year: 1999
• Tongue: English
• Weight: 201 KB
• Volume: 37
• Category: Article
• ISSN: 0887-6266
• DOI: 10.1002/(sici)1099-0488(19990901)37:17<2373::aid-polb8>3.0.co;2-m

✦ Synopsis

The viscoelastic behavior of amorphous ethylene-styrene interpolymers (ESIs) was studied in the glass transition region. The creep behavior at temperatures from 15°C below the glass transition temperature (T g ) to T g was determined for three amorphous ESIs. These three copolymers with 62, 69, and 72 wt % styrene had glass transition temperatures of 11, 23, and 33°C, respectively, as determined by DMTA at 1 Hz. Time-temperature superposition master curves were constructed from creep curves for each polymer. The temperature dependence of the shift factors was well described by the WLF equation. Using the T g determined by DMTA at 1 Hz as a reference temperature, C 1 and C 2 constants for the Williams, Landel, and Ferry (WLF) equation were calculated as approximately 7 and 40 K, respectively. The master curves were used to obtain the retardation time spectrum and the plateau compliance. The entanglement molecular weight obtained from the plateau compliance increased with increasing styrene content as 1,600, 1,870, and 2,040, respectively. The entanglement molecular weight of the ESIs was much closer to that of polyethylene (1,390) than to that of polystyrene (18,700); this was attributed to the unique chain microstructure of these ESIs with no styrene-styrene dyads.