✦ LIBER ✦

Coupling meshes in 3D problems involving movements

✍ Scribed by Lai, H.C.; Rodger, D.; Leonard, P.J.

Book ID: 114547690
Publisher: IEEE
Year: 1992
Tongue: English
Weight: 268 KB
Volume: 28
Category: Article
ISSN: 0018-9464
DOI: 10.1109/20.124038

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A three dimensional finite element mesh

A three dimensional finite element mesh connection for problems involving movement

✍ Perrin-Bit, R.; Coulomb, J.L. 📂 Article 📅 1995 🏛 IEEE 🌐 English ⚖ 424 KB

Coupled elements for problems involving

Coupled elements for problems involving movement [switched reluctance motor]

✍ Rodger, D.; Lai, H.C.; Leonard, P.J. 📂 Article 📅 1990 🏛 IEEE 🌐 English ⚖ 214 KB

3D mesh connection techniques applied to

3D mesh connection techniques applied to movement simulation

✍ Golovanov, C.; Coulomb, J.-L.; Marechal, Y.; Meunier, G. 📂 Article 📅 1998 🏛 IEEE 🌐 English ⚖ 541 KB

Nitsche's method for coupling non-matchi

Nitsche's method for coupling non-matching meshes in fluid-structure vibration problems

✍ P. Hansbo; J. Hermansson 📂 Article 📅 2003 🏛 Springer 🌐 English ⚖ 354 KB

Coupling dynamic mesh technique and heur

Coupling dynamic mesh technique and heuristic algorithms in 3-D-tapered wing design

✍ Ergüven Vatandas; İbrahim Özkol 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 544 KB

## Abstract In this study, Onera M6 wing has been optimized by two parameters, the wing section and the taper ratio, by combining the recent mostly preferable popular approaches, i.e. parallel computing and evolutionary techniques. For the 3‐D models, developed during the optimization stages, the m

Mesh motion techniques for the ALE formu

Mesh motion techniques for the ALE formulation in 3D large deformation problems

✍ José Luf́s Farinatti Aymone 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 781 KB

## Abstract Efficient mesh motion techniques are a key issue to achieve satisfactory results in the arbitrary Lagrangian–Eulerian (ALE) finite element formulation when simulating large deformation problems such as metal‐forming. In the updated Lagrangian (UL) formulation, mesh and material movement