✦ LIBER ✦

Corrosion study on ceramics for conductance measurements of molten carbonates

✍ Scribed by S. Tanase; Y. Miyazaki; M. Yanagida; T. Kodama

Publisher: Elsevier Science
Year: 1985
Tongue: English
Weight: 164 KB
Volume: 11
Category: Article
ISSN: 0272-8842
DOI: 10.1016/0272-8842(85)90322-0

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

95/06441 Studies on solution-derived cer

95/06441 Studies on solution-derived ceramic coatings for oxidation protection of carbon-carbon composites

📂 Article 📅 1995 🏛 Elsevier Science ⚖ 198 KB

Corrosion behavior of coated steels and

Corrosion behavior of coated steels and Mn- and Co-alloyed steels for separator materials on the cathode side in molten carbonate fuel cells

✍ A. C. Schoeler; T. D. Kaun; M. Krumpelt 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 German ⚖ 360 KB 👁 2 views

99/02072 A study of a corrosion-resistan

99/02072 A study of a corrosion-resistant coating for a separator for a molten carbonate fuel cell: Hwang, E. R. and Kang, S. G. J. of Power Sources, 1998, 76, (1), 48–53

📂 Article 📅 1999 🏛 Elsevier Science ⚖ 225 KB

Derived from petroleum or coal heavy oils, carbonaceous materials or resin powders are impregnated with metal compounds such as nitrates, chlorides and hydroxides and then carbonized and graphitized to give partially graphitized crystalline carbonaceous materials as the battery anodes. The anodes an

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB