## Abstract The character of 1‐dodecanethiol (DT) self‐assembled monolayers (SAMs) formed on copper surface in aqueous micellar solution is investigated by means of contact angle measurement, electrochemical impedance spectroscopy (EIS), and polarization curves. The contact angle measurement shows
Corrosion inhibition of copper in tetra-n-butylammonium bromide aqueous solution by benzotriazole
✍ Scribed by S. Liu; J. M. Duan; R. Y. Jiang; Z. P. Feng; R. Xiao
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- German
- Weight
- 457 KB
- Volume
- 62
- Category
- Article
- ISSN
- 0947-5117
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
The corrosion inhibition behavior of benzotriazole (BTA) on copper in 17 wt% tetra‐n‐butylammonium bromide (TBAB) aerated aqueous solution was investigated by weight‐loss tests, potentiodynamic polarization, electrochemical impedance spectroscopy, and scanning electron microscopy/energy dispersive X‐ray spectroscopy. BTA is a good inhibitor in 17 wt% TBAB solution. The inhibition efficiency of BTA increases with increasing inhibitor concentration, attaining efficiencies of up to 90% calculated according to different methodologies. Adsorption of BTA in 17 wt% TBAB solution on the copper surface was found to obey the Langmuir adsorption isotherm.
📜 SIMILAR VOLUMES
## Abstract Following a research programme on copper corrosion inhibition in neutral aqueous solutions, the present paper deals with the results obtained with some heterocyclic organic compounds as copper corrosion inhibitors in 0.1 NaCl solutions. The results are compared with those obtained with
## Abstract The inhibition effect of the extract of galbanum (__Ferula gummosa__ Boiss.) on the corrosion of 304 stainless steel in 2 M HCl solution was studied by weight loss measurements, Tafel polarization, and electrochemical impedance spectroscopy (EIS) methods. It was found that the inhibitio
## Abstract __N__‐Benzoylhydrazones (=__N′__‐alkylidene‐substituted benzohydrazides) **1** are allylated efficiently by reaction with allyl bromide (**2**) in the presence of Zn in aqueous NH~4~Cl solution. The products **3** are formed in excellent yields (85–94%) within 35–50 min (__Scheme, Table