✦ LIBER ✦

Corrosion-fatigue failure of low-carbon and austenitic stainless steels at elevated temperatures and under the periodic influence of working media

✍ Scribed by B. F. Koliushko; I. Yu. Liskevich; T. N. Kalichak; V. V. Potapov

Publisher: Springer
Year: 1975
Tongue: English
Weight: 240 KB
Volume: 9
Category: Article
ISSN: 1573-885X
DOI: 10.1007/bf00715722

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fatigue strength of low-carbon and auste

Fatigue strength of low-carbon and austenitic stainless steels in low-cycle torsion tests in caustic and chloride solutions at elevated temperatures

✍ N. N. Tkachenko; I. Yu. Liskevich; R. P. Svistun 📂 Article 📅 1975 🏛 Springer 🌐 English ⚖ 219 KB

Effect of the smelting method on the cor

Effect of the smelting method on the corrosion-fatigue strength of low-carbon steel at room and elevated temperatures

✍ I. Yu. Liskevich; N. N. Tkachenko; Yu. I. Babei; G. V. Karpenko 📂 Article 📅 1972 🏛 Springer 🌐 English ⚖ 170 KB

Fatigue behaviour of stainless steels un

Fatigue behaviour of stainless steels under simultaneous corrosion attack: I. Behaviour at elevated temperatures and in hot gas environment : Roeder, E. and Schumacher, G.Steel Res. 1989 60, (8), 375–382 (in German)

📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 175 KB

The influence of tempering temperature o

The influence of tempering temperature on the reversed austenite formation and tensile properties in Fe–13%Cr–4%Ni–Mo low carbon martensite stainless steels

✍ Yuanyuan Song; Xiuyan Li; Lijian Rong; Yiyi Li 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 860 KB

The influence of tempering temperature on the reversed austenite formation and tensile properties are investigated in Fe-13%Cr-4%Ni-Mo low carbon martensite stainless steel in the temperature range of 550-950 • C. It is found that at the temperatures below 680 • C, the reversed austenite formation o

Elevated temperature low-cycle fatigue o

Elevated temperature low-cycle fatigue of the austenitic stainless steel types 316 and 253 Ma: Influence of microstructure and danage mechanisms: Sandstrom, R., Engstrom, J., Nilsson, J.O. and Nordgren, A. High Temp. Technol. Feb. 1989 7, (1), 2–10

📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 173 KB