✦ LIBER ✦

Corrosion evaluation of Ti–48Al–2Cr–2Nb (at.%) in Ringer’s solution

✍ Scribed by C. Delgado-Alvarado; P.A. Sundaram

Book ID: 108050250
Publisher: Elsevier Science
Year: 2006
Tongue: English
Weight: 739 KB
Volume: 2
Category: Article
ISSN: 1742-7061
DOI: 10.1016/j.actbio.2006.05.012

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Bone tissue reaction to Ti–48Al–2Cr–2Nb

Bone tissue reaction to Ti–48Al–2Cr–2Nb (at.%) in a rodent model: a preliminary SEM study

✍ Diego F. Castañeda-Muñoz; Paul Antony Sundaram; Norman Ramírez 📂 Article 📅 2007 🏛 Springer 🌐 English ⚖ 493 KB

Wide-gap transient liquid-phase bonding

Wide-gap transient liquid-phase bonding of Ti-48 at. pct Al - 2 at. pct Cr - 2 at. pct Nb

✍ W. F. Gale; Y. Xu; X. Wen; Z. A. M. Abdo 📂 Article 📅 1999 🏛 The Minerals, Metals & Materials Society 🌐 English ⚖ 469 KB

Fretting-corrosion mapping of CP-Ti in R

Fretting-corrosion mapping of CP-Ti in Ringer's solution

✍ Satendra Kumar; B. Sivakumar; T.S.N. Sankara Narayanan; S. Ganesh Sundara Raman; 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 903 KB

Fretting corrosion is a complex phenomena and a variety of factors such as load, contact area, frequency, number of fretting cycles, extent of damage of the fretted zone, trapping of debris between the contacting surfaces, corrosivity of the medium, etc., will determine the fretting-corrosion behavi

Corrosion behavior of Ti-xNb-13Zr alloys

Corrosion behavior of Ti-xNb-13Zr alloys in Ringer's solution

✍ A. Robin; O. A. S. Carvalho; S. G. Schneider; S. Schneider 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 German ⚖ 319 KB

## Abstract Ti‐6Al‐4V alloy has been widely used in restorative surgery due to its high corrosion resistance and biocompatibility. Nevertheless, some studies showed that V and Al release in the organism might induce cytotoxic effects and neurological disorders, which led to the development of V‐fre

In vitro corrosion behaviour of Ti-5Al-2

In vitro corrosion behaviour of Ti-5Al-2Nb-1Ta alloy in Hanks solution

✍ S. Tamilselvi; N. Rajendran 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 German ⚖ 237 KB

## Abstract Electrochemical polarization and impedance spectroscopic (EIS) techniques were used to investigate the corrosion behavior of Ti‐5Al‐2Nb‐1Ta alloy in Hanks solution at different immersion periods (0 h, 120 h, 240 h and 360 h). The impedance spectra are fitted using a non‐linear least squ

Corrosion behaviour of a new Ti-6Al-2Nb-

Corrosion behaviour of a new Ti-6Al-2Nb-1Ta alloy in various solutions

✍ C. Pirvu; I. Demetrescu; P. Drob; E. Vasilescu; S. Ivanescu; M. Mindroiu; C. Vas 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 German ⚖ 462 KB

## Abstract A new Ti‐6Al‐2Nb‐1Ta alloy was obtained for to satisfy the mechanical and anticorrosion requirements in neutral corrosive environment. The corrosion behaviour of this new Ti‐6Al‐2Nb‐1Ta alloy in 0.1 M Na~2~SO~4~, 3% NaCl solutions and synthetic sea water was studied in this paper, using